Cuerpo de Biberón PP sin BPA 270ml
7,95 €
7,95 €
-
¡Obtienes envío gratis!
Envío gratis en compras mayores a 49,00 €
Te falta 49,00 € para el envío gratuito.
Combina bien con:
5,95 €
5,95 €
4 colores
5,95 €
5,95 €
8 colores
7,95 €
7,95 €
9,87 €
17,95 €
9,87 €
17,95 €
7 colores
18,95 €
18,95 €
6 colores
Cuerpo de Biberón PP sin BPA 270ml
Productos similares
11,95 €
4 colores
11,95 €
4 colores
11,95 €
4 colores
11,95 €
4 colores
11,95 €
4 colores
11,95 €
4 colores
11,95 €
4 colores
11,95 €
4 colores
Diseño anticólicos
Flujo de leche suave para barriguitas felices
PP libre de BPA
Una alternativa ligera y fácil de agarrar al vidrio
Transiciones fáciles
Cambio sin complicaciones entre pecho y biberón
Comodidad natural
Se mueve como la tetina de mamá para una succión natural
Cuerpo de Biberón PP sin BPA 270ml
Abastécete de piezas adicionales para el biberón y ten siempre un repuesto listo para usar. Ten en cuenta que este producto solo incluye la base del biberón; todas las demás piezas se deben comprar por separado.
Destacados
Ligero
Su forma delgada y diseño ligero lo hacen perfecto para que las manos pequeñas lo sostengan.
Alta calidad
Todos los componentes son libres de BPA y están hechos de materiales 100% aptos para alimentos.
Fácil de limpiar
Apto para lavavajillas, microondas y congelador (excepto la tetina).
Personalizable
Combina componentes con diferentes materiales, flujos, accesorios, tamaños y colores para crear una solución personalizada que crezca con la alimentación de tu bebé.
Mediciones prácticas
Muestra tanto ml como oz en incrementos estándar de alimentación.
Especificaciones
Este producto incluye
• 1 x cuerpo de biberón (polipropileno libre de BPA, 270 ml)
Uso y cuidados
Antes del primer uso, esteriliza todos los componentes del biberón en agua hirviendo durante 5 minutos. Inspecciona las tetinas regularmente y reemplázalas según sea necesario (cada 1–2 meses para látex, 2–3 meses para silicona) o antes si están dañadas.
Se recomienda esterilizar antes de cada uso. Nunca excedas la resistencia máxima al calor del biberón de 100°C y nunca selles ni cubras el biberón durante la esterilización. Todos los componentes del biberón, excepto el embudo y la tetina, son aptos para lavavajillas en la rejilla superior.
Visita nuestra guía de limpieza del biberón y la guía de limpieza de la tetina para obtener instrucciones importantes.
Seguridad y normas
Cumple con
- Norma Europea EN14350:2020
Folleto
INSTRUCTIONS FOR USE:
Read carefully and retain this information for future use.
Accidents have occurred when babies have been left alone with drinking equipment due to the baby falling. Tooth decay in young children can occur even when non-sweetened fluids are used. This can occur if the baby is allowed to use the bottle for long periods through the day and particularly through the night when saliva flow is reduced.
Before first use, disassemble and clean the product and place the components in boiling water for 5 min. to ensure hygiene.
Before each subsequent use clean carefully to ensure hygiene. Take extra care when microwave heating; localized over heating can occur. Always mix the heated food and check the temperature before feeding. When eating the baby’s food, heat it separately and then pour it into the bottle.
Otherwise, the bottle containing food can be heated slowly in a microwave oven - without the other parts. Assemble the bottle after heating and ensure to fix the ring firmly. Do not heat in the oven or on the stove.
Teat: Clean and sterilize the teat before each use by scalding; leaving the teat to soak in the water for approx. 5 min. DO NOT use cleaning agents or dishwasher. Inspect the teat before each use by pulling the teat in all directions and inspect it carefully before use and replace the teat at the first sign of damage or weakness. Do not leave teats in direct sunlight or heat, or leave teats in disinfectant for longer than recommended, this may weaken the teat.
Bottle and other parts, except teat and funnel: Can be washed by hand and in dishwasher placed on the top rack. Dishwasher safe does not exclude long-term damage such as discoloration. Wash after every use. Use hot soapy water and rinse off excess soap, to make sure all soap residue is gone. Let all the parts dry completely before re-assembly. Except for bottle body, do not heat any plastic parts or the teat in a microwave oven. Please make sure that the child only uses the Baby Bottle for the intended use. Dot not let the child chew on the teat or use it as a soother, even if it is attached to the bottle. When the bottle is empty, or the child cannot drink anymore, remove the bottle.
Do not store the product in humid conditions or near heating sources. Teats produced from natural rubber latex can provide an allergic reaction to some children. Before first use remove the glue dot.
WARNING!
- Continuous and prolonged sucking of fluids will cause tooth decay.
- Always check food temperature before feeding.
- Throw away at the first signs of damage or weakness.
- Keep components not in use out of the reach of children.
- Never attach to cords, ribbons, laces or loose parts of clothing. The child can be strangled.
- Never use feeding teats as a soother.
- Glass bottles may break.
- Always use this product with adult supervision
If you have any questions regarding safety, please contact our customer service at care@bibsworld.com
BIBS PRODUCTION ApS | Høgevej 19 | 3400 Hillerød | Denmark
care@bibsworld.com | bibsworld.com
Más para enamorarte
7,95 €
7,95 €
5,95 €
5,95 €
4 colores
7,95 €
5,95 €
5,95 €
4 colores
Guías
Ya seas un padre primerizo, un amigo de papás, o un padre experimentado, siempre hay algo por aprender. Explora nuestro universo de aprendizaje aquí.