Biberon PP Sans BPA Set Glow 270ml Latex - Vanilla
13,95 €
13,95 €
Nipple material*: Latex
-
Vous bénéficiez de la livraison gratuite !
Livraison gratuite à partir de 49,00 €
Il vous reste 49,00 € pour bénéficier de la livraison gratuite.
S'accorde bien avec:
7,95 €
5,95 €
5,95 €
4 couleurs
12,95 €
11 couleurs
12,95 €
12,95 €
6 couleurs
9,95 €
4 couleurs
Biberon PP Sans BPA Set Glow 270ml Latex - Vanilla
Produits similaires
21,95 €
4 couleurs
13,95 €
4 couleurs
21,95 €
4 couleurs
11,95 €
4 couleurs
11,95 €
4 couleurs
11,95 €
4 couleurs
19,95 €
3 couleurs
Design anti-coliques
Écoulement fluide du lait pour des ventres heureux
PP sans BPA
Une alternative légère et facile à saisir au verre
Transitions faciles
Changement sans souci entre le sein et le biberon
Get Your Glow On
Glows in the dark for 8+ hours
Confort naturel
Se déplace comme la tétine de maman pour une succion naturelle
Biberon PP Sans BPA Set Glow 270ml Latex - Vanilla
Votre biberon BIBS préféré avec un effet phosphorescent magique pour illuminer les tétées nocturnes. Les familles méritent un biberon qui allie confort, praticité et design. Ce biberon primé est léger, passe au lave-vaisselle et est apprécié pour son design épuré. Il est doté d'une valve anti-colique conçue pour aider à réduire l'ingestion d'air et les bulles, ainsi que d'une tétine en forme de sein qui facilite la transition entre l'allaitement, le biberon et la sucette. Livré avec une tétine en latex de caoutchouc naturel, reconnue pour sa douceur et sa souplesse proches de la peau, conçue pour imiter au plus près un vrai mamelon. Conçu au Danemark. Sans BPA. Dès la naissance.
Points forts
- Effet phosphorescent : Un effet magique qui brille dans le noir pour illuminer les tétées nocturnes.
- Facile à activer : Il suffit d'approcher le biberon d'une source de lumière pendant 10 secondes.
- Conception anti-colique : La valve de la tétine est conçue pour aider à réduire l'ingestion d'air afin de prévenir les gaz, les reflux et les coliques, favorisant un flux de lait régulier pour des petits ventres plus heureux.
- Confort naturel : La tétine en forme de sein imite fidèlement la forme, l'ajustement, la sensation et le mouvement du sein maternel pendant l'allaitement, favorisant une prise naturelle et facilitant la transition entre le sein et le biberon.
- Confort cohérent : Conçue pour correspondre à nos tétines de sucette rondes, afin d'éviter toute confusion de succion.
- Latex de caoutchouc naturel : Un matériau très souple et doux, conçu pour imiter la sensation proche de la peau d'un mamelon maternel.
- Léger : Fin, léger et facile à saisir, idéal pour les petites mains qui apprennent à manger seules, et compatible avec notre poignée de biberon pour plus de stabilité et de confiance.
- Haute qualité : Tous les composants sont sans BPA et fabriqués à partir de matériaux 100 % alimentaires ou de qualité médicale. Conforme à la norme européenne EN14350.
- Éléments pratiques : Comprend un verrou anti-fuite, un entonnoir pliable pour le lait en poudre et des graduations aux volumes d'usage courants.
- Facile à nettoyer : Passe au lave-vaisselle (panier du haut uniquement) et au micro-ondes (à l'exception de la tétine et de l'entonnoir).
- Personnalisable : Combinez les composants avec différents matériaux, débits, accessoires, tailles et couleurs pour créer une solution personnalisée qui évolue avec les besoins de votre famille.
- Primé : Salué par des experts produits pour son association d'innovation, de fonctionnalité et de design.
Spécifications
Matériaux
- Biberon : Plastique PP
- Pare-choc : Silicone
- Entonnoir : TPC-ET
- Verrou à lait : Plastique LDPE
- Tous les autres composants : Plastique PP
- Tétine : Latex de caoutchouc naturel
Utilisation et entretien
Sterilize by boiling before first use. Dishwasher safe (top rack only) or wash by hand with warm water and mild soap. Note: Funnel and nipple are not dishwasher safe. Bottle bodies can be sterilized in the microwave and are compatible with most electronic sterilizers, while latex nipples should be sterilized only by scalding. Read leaflet for detailed information.
Visit our bottle cleaning guide and nipple cleaning guide for important instructions.
Sécurité et normes
est conforme à
- Norme européenne EN14350:2020
Leaflet
INSTRUCTIONS FOR USE:
Read carefully and retain this information for future use.
Accidents have occurred when babies have been left alone with drinking equipment due to the baby falling. Tooth decay in young children can occur even when non-sweetened fluids are used. This can occur if the baby is allowed to use the bottle for long periods through the day and particularly through the night when saliva flow is reduced.
Before first use, disassemble and clean the product and place the components in boiling water for 5 min. to ensure hygiene.
Before each subsequent use clean carefully to ensure hygiene. Take extra care when microwave heating; localized over heating can occur. Always mix the heated food and check the temperature before feeding. When eating the baby’s food, heat it separately and then pour it into the bottle.
Otherwise, the bottle containing food can be heated slowly in a microwave oven - without the other parts. Assemble the bottle after heating and ensure to fix the ring firmly. Do not heat in the oven or on the stove.
Teat: Clean and sterilize the teat before each use by scalding; leaving the teat to soak in the water for approx. 5 min. DO NOT use cleaning agents or dishwasher. Inspect the teat before each use by pulling the teat in all directions and inspect it carefully before use and replace the teat at the first sign of damage or weakness. Do not leave teats in direct sunlight or heat, or leave teats in disinfectant for longer than recommended, this may weaken the teat.
Bottle and other parts, except teat and funnel: Can be washed by hand and in dishwasher placed on the top rack. Dishwasher safe does not exclude long-term damage such as discoloration. Wash after every use. Use hot soapy water and rinse off excess soap, to make sure all soap residue is gone. Let all the parts dry completely before re-assembly. Except for bottle body, do not heat any plastic parts or the teat in a microwave oven. Please make sure that the child only uses the Baby Bottle for the intended use. Dot not let the child chew on the teat or use it as a soother, even if it is attached to the bottle. When the bottle is empty, or the child cannot drink anymore, remove the bottle.
Do not store the product in humid conditions or near heating sources. Teats produced from natural rubber latex can provide an allergic reaction to some children. Before first use remove the glue dot.
WARNING!
- Continuous and prolonged sucking of fluids will cause tooth decay.
- Always check food temperature before feeding.
- Throw away at the first signs of damage or weakness.
- Keep components not in use out of the reach of children.
- Never attach to cords, ribbons, laces or loose parts of clothing. The child can be strangled.
- Never use feeding teats as a soother.
- Glass bottles may break.
- Always use this product with adult supervision
If you have any questions regarding safety, please contact our customer service at care@bibsworld.com
BIBS PRODUCTION ApS | Høgevej 19 | 3400 Hillerød | Denmark
care@bibsworld.com | bibsworld.com
Guides
Que vous soyez un nouveau parent, un ami d'un parent ou un parent expérimenté, il y a toujours quelque chose à apprendre. Explorez notre univers d'apprentissage ici.