Corp Biberon PP fără BPA 150 ml
29,95 lei
29,95 lei
-
Beneficiezi de transport gratuit!
Transport gratuit pentru comenzi peste 250,00 lei
Îți mai lipsesc 250,00 lei pentru transport gratuit
Se potrivește bine cu
29,95 lei
29,95 lei
4 culori
29,95 lei
29,95 lei
8 culori
39,95 lei
39,95 lei
39,95 lei
49,47 lei
89,95 lei
49,47 lei
89,95 lei
7 culori
64,95 lei
64,95 lei
5 culori
94,95 lei
94,95 lei
6 culori
Corp Biberon PP fără BPA 150 ml
Arată-mi produse similare
39,95 lei
39,95 lei
49,95 lei
4 culori
49,95 lei
4 culori
49,95 lei
4 culori
49,95 lei
4 culori
Design anti-colici
Flux lin de lapte pentru burtici fericite
PP fără BPA
O alternativă ușoară și ușor de prins la sticlă
Tranziții ușoare
Trecere fără bătăi de cap între sân și biberon
Confort natural
Se mișcă precum tetina mamei pentru o prindere naturală
Corp Biberon PP fără BPA 150 ml
Faceți provizii de piese pentru sticlă și aveți întotdeauna un corp de rezervă pregătit. Vă rugăm să rețineți că acest produs include doar baza sticlei; toate celelalte piese trebuie achiziționate separat.
Esențiale
Ușor
Forma subțire și designul ușor îl fac perfect pentru mâini mici.
Calitate superioară
Toate componentele sunt fără BPA și fabricate din materiale 100 % alimentare.
Ușor de curățat
Potrivit pentru mașina de spălat vase, cuptorul cu microunde și congelator (cu excepția tetinei).
Personalizabil
Combină componente din diferite materiale, rate de flux, accesorii, mărimi și culori pentru a crea o soluție care crește odată cu familia ta.
Măsurători convenabile
Afișează atât ml, cât și oz în intervale standard de alimentare.
Specificații
Acest articol include
• 1 x corp al sticlei (polipropilenă fără BPA, 150 ml)
Utilizare și îngrijire
Înainte de prima utilizare, sterilizați toate componentele sticlei în apă clocotită timp de 5 minute. Inspectați tetinele în mod regulat și înlocuiți-le după cum este necesar (la fiecare 1–2 luni pentru latex, 2–3 luni pentru silicon), sau mai devreme dacă sunt deteriorate.
Se recomandă sterilizarea înainte de fiecare utilizare. Nu depășiți niciodată rezistența termică maximă a sticlei de 100 °C și nu sigilați sau acoperiți sticla în timpul sterilizării. Toate componentele sticlei, cu excepția pâlniei și tetinei, pot fi spălate în raftul superior al mașinii de spălat vase.
Vizitați ghidul nostru de curățare a sticlei și ghidul de curățare a tetinei pentru instrucțiuni importante.
Siguranță și standarde
Conform cu
- Standardul European EN14350:2020
Prospect
INSTRUCTIONS FOR USE:
Read carefully and retain this information for future use.
Accidents have occurred when babies have been left alone with drinking equipment due to the baby falling. Tooth decay in young children can occur even when non-sweetened fluids are used. This can occur if the baby is allowed to use the bottle for long periods through the day and particularly through the night when saliva flow is reduced.
Before first use, disassemble and clean the product and place the components in boiling water for 5 min. to ensure hygiene.
Before each subsequent use clean carefully to ensure hygiene. Take extra care when microwave heating; localized over heating can occur. Always mix the heated food and check the temperature before feeding. When eating the baby’s food, heat it separately and then pour it into the bottle.
Otherwise, the bottle containing food can be heated slowly in a microwave oven - without the other parts. Assemble the bottle after heating and ensure to fix the ring firmly. Do not heat in the oven or on the stove.
Teat: Clean and sterilize the teat before each use by scalding; leaving the teat to soak in the water for approx. 5 min. DO NOT use cleaning agents or dishwasher. Inspect the teat before each use by pulling the teat in all directions and inspect it carefully before use and replace the teat at the first sign of damage or weakness. Do not leave teats in direct sunlight or heat, or leave teats in disinfectant for longer than recommended, this may weaken the teat.
Bottle and other parts, except teat and funnel: Can be washed by hand and in dishwasher placed on the top rack. Dishwasher safe does not exclude long-term damage such as discoloration. Wash after every use. Use hot soapy water and rinse off excess soap, to make sure all soap residue is gone. Let all the parts dry completely before re-assembly. Except for bottle body, do not heat any plastic parts or the teat in a microwave oven. Please make sure that the child only uses the Baby Bottle for the intended use. Dot not let the child chew on the teat or use it as a soother, even if it is attached to the bottle. When the bottle is empty, or the child cannot drink anymore, remove the bottle.
Do not store the product in humid conditions or near heating sources. Teats produced from natural rubber latex can provide an allergic reaction to some children. Before first use remove the glue dot.
WARNING!
- Continuous and prolonged sucking of fluids will cause tooth decay.
- Always check food temperature before feeding.
- Throw away at the first signs of damage or weakness.
- Keep components not in use out of the reach of children.
- Never attach to cords, ribbons, laces or loose parts of clothing. The child can be strangled.
- Never use feeding teats as a soother.
- Glass bottles may break.
- Always use this product with adult supervision
If you have any questions regarding safety, please contact our customer service at care@bibsworld.com
BIBS PRODUCTION ApS | Høgevej 19 | 3400 Hillerød | Denmark
care@bibsworld.com | bibsworld.com
Mai multe de iubit
114,95 lei
39,95 lei
39,95 lei
39,95 lei
169,95 lei
3 culori
64,95 lei
64,95 lei
3 culori
Ghiduri
Fie că ești părinte la început de drum, prieten al unui părinte sau chiar un părinte cu experiență, întotdeauna există ceva nou de învățat. Explorează universul nostru educațional aici.