Schwitzerland

Anti-Kolik-Design

Gleichmäßiger Milchfluss für glückliche Bäuchlein

BPA-freies PP

Eine leicht zu greifende, leichte Alternative zu Glas

Einfache Übergänge

Problemloser Wechsel zwischen Brust und Flasche

Natürlicher Komfort

Bewegt sich wie Mamas Sauger für ein natürliches Anlegen

Baby BPA-freies PP-Flaschenset Grow and Flow 150 ml/270 ml Latex - Ivory

Familien verdienen eine Babyflasche, die Komfort, Sicherheit und Design in Einklang bringt. Lernen Sie eine leichte, spülmaschinenfeste und preisgekrönte Flasche kennen, die für ihr elegantes Design, das Anti-Kolik-Ventil zur Reduzierung von Luft und Reflux sowie den brustähnlichen Sauger geliebt wird, der den Übergang zwischen Stillen, Flaschenernährung und Schnullerverwendung erleichtert. Mit einer hautweichen und hochflexiblen Sauger aus natürlichem Kautschuklatex.

Highlights

Specifications

Use and Care

Safety and standards

INSTRUCTIONS FOR USE:

Read carefully and retain this information for future use.

Accidents have occurred when babies have been left alone with drinking equipment due to the baby falling. Tooth decay in young children can occur even when non-sweetened fluids are used. This can occur if the baby is allowed to use the bottle for long periods through the day and particularly through the night when saliva flow is reduced.

Before first use, disassemble and clean the product and place the components in boiling water for 5 min. to ensure hygiene.
Before each subsequent use clean carefully to ensure hygiene. Take extra care when microwave heating; localized over heating can occur. Always mix the heated food and check the temperature before feeding. When eating the baby’s food, heat it separately and then pour it into the bottle.
Otherwise, the bottle containing food can be heated slowly in a microwave oven - without the other parts. Assemble the bottle after heating and ensure to fix the ring firmly. Do not heat in the oven or on the stove.

Teat: Clean and sterilize the teat before each use by scalding; leaving the teat to soak in the water for approx. 5 min. DO NOT use cleaning agents or dishwasher. Inspect the teat before each use by pulling the teat in all directions and inspect it carefully before use and replace the teat at the first sign of damage or weakness. Do not leave teats in direct sunlight or heat, or leave teats in disinfectant for longer than recommended, this may weaken the teat.

Bottle and other parts, except teat and funnel: Can be washed by hand and in dishwasher placed on the top rack. Dishwasher safe does not exclude long-term damage such as discoloration. Wash after every use. Use hot soapy water and rinse off excess soap, to make sure all soap residue is gone. Let all the parts dry completely before re-assembly. Except for bottle body, do not heat any plastic parts or the teat in a microwave oven. Please make sure that the child only uses the Baby Bottle for the intended use. Dot not let the child chew on the teat or use it as a soother, even if it is attached to the bottle. When the bottle is empty, or the child cannot drink anymore, remove the bottle.

Do not store the product in humid conditions or near heating sources. Teats produced from natural rubber latex can provide an allergic reaction to some children. Before first use remove the glue dot.

German

WARNING!

Continuous and prolonged sucking of fluids will cause tooth decay.
Always check food temperature before feeding.
Throw away at the first signs of damage or weakness.
Keep components not in use out of the reach of children.
Never attach to cords, ribbons, laces or loose parts of clothing. The child can be strangled.
Never use feeding teats as a soother.
Glass bottles may break.
Always use this product with adult supervision

If you have any questions regarding safety, please contact our customer service at care@bibsworld.com

BIBS PRODUCTION ApS | Høgevej 19 | 3400 Hillerød | Denmark
care@bibsworld.com | bibsworld.com